Different grades of slip resistance can be achieved by inclusion of graded aggregate between coats. It is:
- Chemical resistant
- Hard wearing
- Abrasion resistant
- Solvent free, low odour
- Aesthetically attractive – brightens up dull factories and warehouses
- Seamless and hygienic finish
- Low maintenance
- Slip resistant finish can be tailored to specific client requirements
- Nonylphenol free
FeRFA Resin Flooring guidelines
Description:
Applied in two or more coats. Generally solvent or water borne.
Duty:
light foot traffic, occasional rubber tyred vehicles.
Typical Thickness:
up to 150 µm
Description:
Applied in two or more coats. Generally solvent free.
Duty:
light foot traffic, occasional rubber tyred vehicles/regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys
Typical Thickness:
150 µm to 300 µm
Description:
Applied in two or more coats. Generally solvent or water borne.
Duty:
lregular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys
Typical Thickness:
300 µm to 1000 µm
Description:
Aggregate dressed systems based on multiple layers of floor coatings or flow-applied floorings, often described as ‘sandwich’ systems.
MD/HD
Duty:
regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys/constant fork lift truck traffic, hard plastic wheeled trolleys, some impact
Typical Thickness:
> 2 mm
Description:
Often referred to as ‘self-smoothing’ or ‘self-levelling’ flooring and having a smooth surface.
Duty:
regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys/constant fork lift truck traffic, hard plastic wheeled trolleys, some impact
Typical Thickness:
2 mm to 3 mm
Description:
Trowel-finished, heavily filled systems, generally incorporating a surface seal coat to minimize porosity.
Duty:
regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys/constant fork lift truck traffic, hard plastic wheeled trolleys, some impact
Typical Thickness:
> 4 mm
Description:
Having a smooth surface.
Duty:
constant fork lift truck traffic, hard plastic wheeled trolleys, some impact/severe heavily loaded traffic and impact
Typical Thickness:
4 mm to 6 mm
Description:
Trowel-finished, aggregate filled systems effectively impervious throughout their thickness.
Duty:
severe heavily loaded traffic and impact
Typical Thickness:
> 6 mm
Pagetect SF41 may be used as a hard wearing coloured floor coating in areas such as factories, warehouses, plant and storerooms where high resistance against chemical attack is required. Also used as a line marker in demarcation areas.
Product: Pagetect SF41
Finish: Gloss
Thickness: 0.35 mm Colour: Preparatory work and application in accordance with suppliers instructions.
Supplier: Page Industrial Coatings Ltd.
Telephone : Customer Service – +44 (0) 1443 475 270
Concrete or screed substrate should be a minimum of 25N/mm2 , free from laitance, dust and other contamination . The substrate should be dry to 75% RH as per BS8204 and free from rising damp and ground water pressure. If no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Pagetect SF41 system.
Primer (if weak substrate): Pageprime@ 0.25 kg/m2
Coating: Pagecoat SF41 (density 1.4 kg/I)
1st Coat @ 0.25 – 0.3 kg/m2
2nd Coat @ 0.25 – 0.3 kg/m
Coverage rates will vary with surface profile and temperature.
Non-slip finishes: Various grades of quartz, aluminium oxide, glass spheres or silicon carbide can be incorporated to provide a textured surface.
Detailed application instructions are available upon request.
The installation should be carried out by trained personnel of Page Industrial Coatings Ltd
The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture and application of the products by Page staff and fully trained experienced contractors.
The figures that follow are typical properties achieved in laboratory tests at 20°C and at 50% Relative Humidity:
Fire Resistance BS476-7
Surface spread of flame: Class 1
Slip Resistance Dry >40 low slip potential Method described in BS 7976-2
(typical values for 4-S rubber slider)
(in accordance with HSE and UKSRG guidelines)
The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/or surface contaminants (wet or dry).
Textured systems are recommended to meet slip resistance value requirements for wet conditions and/or surface contaminants (wet or dry) – please contact our Technical Advisors for further details and specifications.
Thermal Resistance: Tolerant up to 70°C
Water Permeability: Nil – Karsten test (impermeable)
Surface Hardness: 180 secs. Koenig Hardness Test
Chemical Resistance: Contact Technical Department
Abrasion Resistance: Taber Abrader: 5 mg loss per 1000 cycles (1 kg load using CS17 wheels) BS8204-2 Grade AR2
Compressive Strength: > 80 N/mm2 (BS6319)
Flexural Strength: > 60 N/mm 2 (BS6319)
Tensile Strength: > 15 N/mm2 (BS6319)
Bond Strength N/: Greater than cohesive strength of 25 mm2 concrete. >1.5 MPa
Conforms with BS 8204-6/FeRFA type 3
Speed of Cure:
Light traffic: 10°c: 48 hrs; 20°c: 16 hrs; 30°c: 12 hrs
Full traffic: 10°c: 72 hrs; 20°c: 48 hrs; 30°c: 40 hrs
Full chemical cure: 10°c: 12 days; 20°c: 7 days; 30°c: 7 days
Aftercare – Cleaning and Maintenance
Clean regularly using a single or double headed rotary scrubber drier in conjunction with a mildly alkaline deter gent.
Important Note
Page‘s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request.
Aftercare – Cleaning and Maintenance
Clean regularly using a single or double headed rotary scrubber drier in conjunction with a mildly alkaline detergent.
Further Information
To ensure you are specifying a fit for purpose flooring for your project please consult our Technical Advisors on the number below or visit our website to register your interest.
