Pageflow Shield SL is a hygienic self smoothing floor finish. Typical uses include laboratories, clean rooms, warehouses, electronic, aerospace, automotive and printing plants.
Pageflow Shield SL is a hygienic self smoothing floor finish.
Dry process areas where the floor is subjected to medium to heavy duty foot, trolley, pallet truck and rubber wheeled fork lift traffic. Typical uses include laboratories, clean rooms, warehouses, electronic, aerospace, automotive and printing plants.
Applied in two or more coats. Generally solvent or water borne.
light foot traffic, occasional rubber tyred vehicles.
up to 150 µm
Applied in two or more coats. Generally solvent free.
light foot traffic, occasional rubber tyred vehicles/regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys
150 µm to 300 µm
Applied in two or more coats. Generally solvent or water borne.
lregular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys
300 µm to 1000 µm
Aggregate dressed systems based on multiple layers of floor coatings or flow-applied floorings, often described as ‘sandwich’ systems.
MD/HD
regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys/constant fork lift truck traffic, hard plastic wheeled trolleys, some impact
> 2 mm
Often referred to as ‘self-smoothing’ or ‘self-levelling’ flooring and having a smooth surface.
regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys/constant fork lift truck traffic, hard plastic wheeled trolleys, some impact
2 mm to 3 mm
Trowel-finished, heavily filled systems, generally incorporating a surface seal coat to minimize porosity.
regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys/constant fork lift truck traffic, hard plastic wheeled trolleys, some impact
> 4 mm
Having a smooth surface.
constant fork lift truck traffic, hard plastic wheeled trolleys, some impact/severe heavily loaded traffic and impact
4 mm to 6 mm
Trowel-finished, aggregate filled systems effectively impervious throughout their thickness.
severe heavily loaded traffic and impact
> 6 mm
Pageflow Shield SL Finish: Gloss
Thickness: 2 mm
Preparatory work and application in accordance with suppliers instructions.
Supplier: Page Industrial Coatings Ltd.
Telephone : Customer Service – +44 (0) 1443 475 270
Concrete or screed substrate should be a minimum of 25N/mm2 , free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS 8204 and free from rising damp and ground water pressure. If no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Pageflow Shield SL system.
Primer: Pageprime @ 0.25 kg/m (Porous substrates may require 2 coats)
Topping : Page Flow Shield SL@ 3.6 kg/m2
Detailed application instructions are available upon request.
The installation should be carried out by trained personnel of Page Industrial Coatings Ltd
The finished system is assessed as non-hazardous to health and the environment. The long service life and seam less surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are con trolled during manufacture and application of the products by Page staff and fully trained and experienced contractors.
The figures that follow are typical properties achieved in laboratory tests at 20°C and at 50% Relative Humidity.
Fire Resistance: BS 476:Part 7: Surface spread of flame – Class 2 (indicative)
Slip Resistance:
Dry >40 low slip potential Method described in BS 7976-2
(typical values for 4-S rubber slider) (in accordance with HSE and UKSRG guidelines)
The slipperiness of flooring materials can change significantly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer-term wear and/or surface contaminants (wet or dry).
Textured systems are recommended to meet slip resistance value requirements for wet conditions and/or surface contaminants (wet or dry) – please contact our Technical Advisors for further details and specifications.
Abrasion Resistance duty: BS 8204-2 Class AR2 – Medium industrial and commercial.
Temperature Resistance: Tolerant of sustained temperatures up to 50°C
Water Permeability: Nil – Karsten test (impermeable)
Chemical Resistance: Contact Technical Department
Compressive Strength: 55 N/mm 2 (BS 6319)
Flexural Strength: 35 N/mm2 (BS 6319)
Tensile Strength: 25 N/mm2 (BS 6319)
Bond Strength: Greater than cohesive strength of 25N/mm2 concrete. >1.5 MPa.
Toxicity (when cured): Taint free to sensitive foodstuffs
Complies with BS 8204-6/FeRFA category 5.
Speed of Cure:
Light traffic: 10°c: 24 hrs; 20°c: 12 hrs; 30°c: 6 hrs
Full traffic: 10°c: 72 hrs; 20°c: 48 hrs; 30°c: 24 hrs
Full chemical cure: 10°c: 12 days; 20°c: 7 days; 30°c: 7 days
Aftercare – Cleaning and Maintenance
Clean regularly using a single or double headed rotary scrubber drier in conjunction with a mildly alkaline detergent.
Further Information
To ensure you are specifying a fit for purpose flooring for your project please consult our Technical Advisors on the number below or visit our website to register your interest in specifying one of the most durable floors on the market.
Important Note
Page’s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request.
Page specialises in the installation of high performance Industrial Resin Flooring, self levellers, coatings systems, floor sealers and screeds. We use only the most advanced highest quality resin systems. We add in depth professional expertise producing flooring that is both cost effective and long lasting. New floors or refurbished floors – we have them covered.
